Begginers Guide to Processing 18650 Cells | Cell Database


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
home brew e-bike
#1
One of my projects is making a e-bike with my26650 A123 cells.

I bought the parts from the UK 1000W 48V motor+controller.
I will have dual speed control -PAS and tumbtrottle.

I started with single speed On-One that I build in 2010

 

specs:
One-one steel frame+fork
Race-face cranck set
Xt bottom bracket
Avid mechanical disk brake cable routing through the fork 180mm disk
mini steel steer and random alloy Stem
DT-swiss DH hubs spokes and rims small road tires.
beefy SS chain.
38T front ring
11T rear

I will need to upgrade since the 1000W engine will give loads of POWER  Big Grin





 motor wiring and display installed.
48T front ring
16T rear



 

The display a KT-LCD1


 

The PAS system is installed between the bottom bracket and frame. 
The magnet disk is mounted on the square axle.






The motor controller is a 48V Mxus sold by Cyclotricity UK
The Motor is marked Cyclotricity marked as 250W restricted. (actual 350W/3000W MXUS)


  

54.4 V battery pack "installed"

Test set up is ducked-taped to go, peddle assist set to "5" GOO!

And it's F*cking scary fast!! Tongue

It's restricted to 250W but still goes 49km/p when peddling hard.
It's possible to fully unlock the 1000W Angel .

Next: 
- making a battery box with charge plug mid frame
- integrate the BMS in the box.
- upgrade the disk brakes to hydraulic Front and Back (instead of the mechanical frontbrake)
- front suspension might be nice  Shy
zag2me and rebelrider.mike like this post
Greetz Dennis

http://www.verticallife.nl

Current Of-grit setup
5 230Wp canadian Solar panels
2 Voltmaster 270Ah 12V Battery's
1 Outback flexmax80
1 Phoenix 3000 inverter
Reply


#2
So I started my Battery box.


3 aluminium profile's


sized to fit the frame


curing the epoxy


Glasfiber reinforced polyester plates

and glasfiber tape + epoxy resin to seal it all up

 
battery trial fit with controller 

 
status so far:
its working just need to fix the components inside the box against movement.
and I need to smoothen the box 
and make a lid/cover

p.s. Yes thats my dogs "Castle" in the background
Greetz Dennis

http://www.verticallife.nl

Current Of-grit setup
5 230Wp canadian Solar panels
2 Voltmaster 270Ah 12V Battery's
1 Outback flexmax80
1 Phoenix 3000 inverter
Reply
#3
Following. I also want an e-bike some day Smile
Follow me! >> YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcomming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply


Who read this thread?
31 User(s) read this thread:
hbpowerwall (09-16-2017, 10:46 PM), Ivo Staelens (09-08-2017, 05:08 PM), floydR (09-11-2017, 10:57 PM), DarkRaven (09-11-2017, 12:42 PM), umop-episdn (09-15-2017, 01:38 AM), karrak (09-08-2017, 09:48 AM), frenchclem17 (09-15-2017, 07:56 AM), Thomas Koorneef (09-08-2017, 01:08 PM), barryreidbooks (09-12-2017, 09:07 AM), upcdm22 (09-08-2017, 09:33 AM), zag2me (09-13-2017, 09:16 AM), NicZa (09-12-2017, 08:33 PM), Süleyman Turan (09-13-2017, 06:47 AM), kokru1971 (09-13-2017, 12:26 PM), SWEwall (09-08-2017, 08:59 PM), Geek (09-12-2017, 04:11 AM), netmonk (09-11-2017, 09:39 AM), daromer (09-11-2017, 08:45 AM), Wattsup (09-08-2017, 11:27 AM), jdeadman (09-11-2017, 12:34 PM), wim (09-11-2017, 10:16 AM), frnandu (09-11-2017, 05:28 PM), typ49 (09-09-2017, 09:35 AM), 1958 greyhound (09-18-2017, 07:33 AM), rebelrider.mike (09-13-2017, 09:16 AM), watts-on (09-11-2017, 09:53 AM), Dan Lim (09-17-2017, 08:33 PM), Hanssing (09-11-2017, 06:46 PM), Stefaan De Ridder (09-11-2017, 08:48 AM), Dennis Van Hoek (09-12-2017, 03:53 PM), tocan (Today, 07:14 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)