Beginners Guide to Processing 18650 Cells | Cell Database


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What a crappy breaker box
#11
hi Greyhound..

I was looking at the Neurio reviews on home depot and a similar problem was solved by a customer.
if I understand this right, he grouped all of the wires coming off the breakers from each phase and ran those wires through the probes.
Separate the wires into A and B legs and make sure the directions are the same on all the wires in each group. Seems like a work around, but if you have enough wire length to route the wires, then it might work.

You may do what he did and email Neurio customer support.

http://www.homedepot.com/p/Neurio-Home-E.../206639413

"I have to start out by telling you that the customer service is Excellent!
We are not a big electricity user. No kids, retired on a budget so every savings we can obtain is great. Knowing what each switch cost to turn on is eye opening.
I have a very small electrical box and the main power lines are covered and too big to get the CT's to fit.
I emailed customer service and they responded very quickly. I sent pictures of my small box and they advised me on how to install the system. The A phase and B phase wires are what I had to use as a work around. You need to understand how to read the breakers and what wires to group but it works great.
Thanks again to the customer service team!
Bob, 74 Read More
Pros: Clear Instructions, Compact, Nice Design, Easy Installation, Easy to Use, Eco-Friendly, Lots of Features"
Korishan likes this post
Reply


#12
O that will work.
All the wires run down the side and out one hole.
Thanks
Korishan likes this post
Reply
#13
Where I live, most home repair and improvement, including wiring can be done by the home owner without a license.

Unlicensed contractors is where you get hung up.

You might want to look in to that if you think you can DIY a panel.

If you have other goofy things like aluminum wire or knob and tube, the expense is replacing that so you can open up a really expensive can of worms if you need to bring a non-conforming building up to code.

Any way, a little research might let you find a less expensive option in some places.
Reply
#14
I have wired 5 houses my self, I can do all the wiring myself.

You can not pull a meter with out being licensed in any state that I know of.

If the power company wasn't such a holes about the meter, id just cut the tag, pull it and do it live.

If I pull it without permission, the power company will pull the meter, take it and test it to make sure it wasn't tampered with.
Then they ram the building inspector up your rear.

But jail and me don't get along.
Reply


Who read this thread?
59 User(s) read this thread:
vlmendezjr (11-19-2017, 10:42 PM), ltdorn (06-26-2017, 11:21 PM), kazbach (07-31-2017, 07:06 PM), ismaildoganw (08-02-2017, 11:01 AM), Joost2 (08-16-2017, 08:06 PM), silverse2m6 (06-26-2017, 09:00 PM), Hanssing (08-02-2017, 01:07 PM), Daggerzz (08-01-2017, 05:17 AM), jesusangel (07-31-2017, 08:55 PM), watts-on (08-02-2017, 01:00 PM), milespitt3841 (08-01-2017, 12:15 AM), 1958 greyhound (08-02-2017, 09:47 AM), Jeremy Choy (08-01-2017, 09:03 PM), Stefaan De Ridder (08-02-2017, 11:03 AM), Chiptosser (08-02-2017, 01:34 PM), Inverted 18650 (08-01-2017, 11:40 AM), Tostaki (10-30-2017, 04:03 PM), WallBender (09-22-2017, 06:08 PM), Sa_2307 (10-15-2017, 06:39 PM), Geek (09-12-2017, 04:53 AM), Pyro (08-01-2017, 11:33 PM), KtB (08-01-2017, 08:16 AM), Eric Snyder (08-05-2017, 05:24 PM), Sun plumber (08-02-2017, 05:01 AM), N00bPwr (07-24-2017, 06:47 AM), Xander52 (07-18-2017, 12:54 AM), John.Siler (07-31-2017, 06:54 PM), brafi (08-01-2017, 06:07 PM), Robert Baumer (06-24-2017, 12:33 PM), John (06-24-2017, 06:52 PM), typ49 (08-01-2017, 09:43 AM), Korishan (08-02-2017, 12:09 PM), coolfx (06-26-2017, 09:45 AM), Majorphill (08-01-2017, 10:33 AM), RudyLiPower (06-26-2017, 10:28 PM), opus40 (08-01-2017, 10:06 AM), owitte (08-02-2017, 10:27 AM), PaulKennett (06-25-2017, 11:09 AM), station240 (06-27-2017, 06:24 PM), Toochi84 (06-25-2017, 09:45 PM), mike (07-31-2017, 10:34 AM), daromer (08-01-2017, 05:37 PM), AZ_Tekkie (07-31-2017, 06:02 AM), PAF (06-24-2017, 06:44 PM), Janis (06-24-2017, 04:50 PM), Batrium (07-31-2017, 03:42 AM), frnandu (08-02-2017, 11:32 AM), MajStealth (06-24-2017, 06:35 PM), babrdausasday6590 (07-31-2017, 11:36 AM), wim (08-02-2017, 02:35 PM), 2146 (08-01-2017, 09:48 PM), monsted (07-10-2017, 10:37 PM), jdeadman (08-01-2017, 12:41 AM), HogensHero (06-26-2017, 11:39 AM), Alec_J (06-24-2017, 12:38 PM), egam (08-06-2017, 12:28 AM), Scepterr (06-24-2017, 03:26 PM), Wattsup (06-25-2017, 08:04 AM), hbpowerwall (08-03-2017, 06:20 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)