Begginers Guide to Processing 18650 Cells | Cell Database


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Opus BT-C3100 v2.2 Issues?
#11
Ah. Good point. 10% does seem high.

Now I'm really hanging out for the new Batlab to see how that compares.
Reply


#12
When charging with the Skilhunt M4D it gives 10-20% less capacity than what's previously discharged by the BT-C3100, % depending mostly of capacity and chemistry.
For exemple:
-Two identical cells will have the same capacity drop and the more high cap they are the more they drop most of the time, like 10% until 2000mah, 20% on some 2600+.
-Two 2200 mah discharged on the BT-C3100 but different brand/model can result one 2100 and the other 1950 charge on M4D.

So both my bt-C3100 give false capacity, but I will keep them as discharger, if all my cells are tested the same way it should be ok for a powerwall but I have to keep in mind they can't be trusted for small packs of different cells.
Current setup: 21x 215wc poly, 7.5kWh 7s 18650, PIP 2424msxe.
Reply
#13
You can test the same cell in the same charger twice and it won't give you the same exact capacity. Just go with the one you feel is most accurate. Also, what is the discharge voltage of the BT-C3100? Most of them including the iMax, are 3.0v. I use the DigitalCharger 4s since it goes down to 2.8v.
Reply
#14
Yes, I know, and it's pretty close when I re-run a test, the problem is they always give too much capacity, a 5-10 year's old Samsung 26F can't give 2700-2800Mah at 1Amp.
BT-C3100 V2.2 stop discharge at 2.8v but capacity between 3V and 2.8V is almost null and most batteries fall from 3.1 to 2.8 in less than a couple of minutes.

Imax is one cell at the time so I need the two bt-c3100 to have 8 channels to test capacity.
Current setup: 21x 215wc poly, 7.5kWh 7s 18650, PIP 2424msxe.
Reply
#15
Hi I had my Opus BT-C3100 blow up on me last night while discharging my current collection of batteries; then did that mad dash around the room while 50+ plus batteries are charging because I can smell 'magic smoke', then waving my IR thermometer around like a mad man. Only to find smoke pouring out of of the back of the opus where to DC connector plugs in. I unplugged and took the back off and found the PCB sparking and the display flashing (indicating a buggered PSU) and possible an arcing track on the power in track. Needless to say it's about 2 weeks old, and I've contacted the ebay seller.
Reply
#16
Wow!!!  that's nuts!!   Umm, you didn't get it on video, did you?   Rolleyes  I would of loved to see you running around like a madman  Tongue

It sucks that the opus died. However, it's better the opus than the cells, imho. Cells could cause lots of fires as they like to explode and fling across the room and land in a place you absolutely can't get to as it found the 'only' too small to get into and can it before it runs rampant. And no, not from experience. Just thinking of what "could" of happened.
Glad nothing major happened, just a little excitement
Proceed with caution. Knowledge is Power! Literally! Cool 
Knowledge is Power; Absolute Knowledge is Absolutely Shocking!
Dollar Shave Club. Best Razor I've ever used
Certified 18650 Cell Reclamation Technician
Reply
#17
Use the number from the charger as a number. Ie just stating in what bin you should throw them. If that number is 10% to much or 100% to much its a way to tell at what state the cell is in. We all know that it is 10-20% higher than some other but it also depends on what charger you do compare to and more importantly what voltages. First of all the opus tend to go a bit high and then it also goes very very low. Compare to some others that stop rather early at both ends Smile (If you want to compare full capacity)

The last cells i got new for testing they all had their capacity measured between 4.2 and 2.5V and at 0.2C... Thats quite a difference to what most of us will be running in real life Smile
Korishan likes this post
Follow me! >> YouTube / Forum system setup / My webpage  Diy Tech & Repairs

Current: 10kW Mpp Hybrid | 4kW PIP4048 | 2x PCM60x | 83kWh LiFePo4 | 10kWh 14s 18650 |  66*260W Poly
Upcomming: 14S 18650~30kWh | Automatic trip breakers, and alot more
Reply


Who read this thread?
37 User(s) read this thread:
daromer (09-03-2017, 07:12 AM), Chiptosser (09-03-2017, 12:18 AM), Chicken (09-03-2017, 04:46 PM), Chris Evans (09-06-2017, 11:16 PM), wifiphreak (07-22-2017, 09:33 AM), Al's Shed (09-04-2017, 10:12 AM), Mazlem (09-05-2017, 09:18 PM), Geek (09-04-2017, 02:53 AM), Longbush Powerwall (09-08-2017, 07:25 AM), Jon (09-02-2017, 10:13 PM), horizon69 (09-05-2017, 02:39 AM), SimonW (09-03-2017, 08:44 AM), Pedrohnobre (09-20-2017, 09:37 PM), Nmonic (09-03-2017, 06:50 PM), I'm Batman (09-06-2017, 04:36 AM), JeffP (09-09-2017, 07:25 AM), Pierre (09-15-2017, 04:07 AM), Stefaan De Ridder (09-03-2017, 07:38 AM), Mark Lex (06-30-2017, 03:42 AM), Dicklinn (06-17-2017, 02:30 PM), goodnowm (06-27-2017, 09:58 AM), coolfx (03-05-2017, 09:08 PM), Korishan (09-03-2017, 03:37 PM), sz1729 (08-04-2017, 03:57 PM), FireFrog (09-03-2017, 02:45 AM), Frnandu Martiński (05-24-2017, 11:22 PM), jdeadman (09-03-2017, 01:41 AM), 2146 (04-19-2017, 08:11 PM), wim (09-03-2017, 09:18 AM), frnandu (09-03-2017, 09:42 PM), typ49 (09-04-2017, 08:54 AM), Robert Baumer (05-19-2017, 10:30 PM), Incolor_Devil (06-03-2017, 03:45 PM), rebelrider.mike (08-14-2017, 05:21 AM), watts-on (09-03-2017, 07:51 AM), Hanssing (09-03-2017, 07:59 AM), Grant Mercer (09-22-2017, 08:22 AM)

Forum Jump:


Users browsing this thread: 1 Guest(s)